ADD-ON ITEM SAVE AN EXTRA $1.00
on this item by adding any other item to your purchase!
Durable long lasting lifts! 2 sides to fit your needs! Power lift for more revs or oval lift for the comfortable release! Vise's #1 selling insert. The power lift/oval combination gives you two grips in one.
Yes, I would recommend this to a friend
Vise grips are very comfortable.
Nothing spectacular about the grip. It works as it should, and is comfortable to my fingers.
No, I would not recommend this to a friend
Thought that the walls would be thicker allowing for more specialized modification.
Thanks for asking your question! Once approved by our staff it will be posted here for others to answer. If you'd like to receive answers to your question via email enter your email address below.
what is the next size larger from a 29/32
Hello Tank! That is actually the largest size for this product in particular.
How do I determine what size i need
The size is based on the width of your finger. The sizes are in increments of 1/64 so your average ruler will likely not be able to help. Your proshop could check your measurements to get you an accurate size or if you have an old insert from a previous ball, you may can check the numbers on this to find the comparable size.
I like to change the lift often, I bowl twice a week. Is a package of 20 or more available.
Hi Bernie. Unfortunately, we do not offer that option on our site.
If I get a certain size should both sides of the grip fit my fingers?
That is a better question to ask your local driller.
What does the size 6 and 6 1/2 convert to in inches?
A size 6 equals a 3/4 and the 6.5 equals a 49/64.
I'm confused about the sizing are there outside inside size charts
The sizing on our site is the inner diameter of the insert. The outer diameter will depend on the size selected and your local proshop can make sure to drill the hole in the ball to fit the size you select.
Looking for size 5
On the Vise size chart a size 5 equals 23/32.
what size are #6 and #7 inserts
On the Vise chart the size 6 = 3/4 and the size 7 = 25/32 .
Would this insert fit inside the basic large or extra drilling?
The basic drilling is not finger tip drilling. It is conventional drilling so you would not want to put finger tip inserts in conventional drilling.
What size grip should I get if I use a 14lb ball
The inserts will depend on your finger size so you may want to get your local proshop to measure you and see what size would be best for you.
Due to the time it takes to produce the VISE Power Lift & Oval Grip Black ball it will ship in immediately. We cannot ship this ball outside the United States.