Take $5 off your purchase of $50+ today!  
Coupon excludes instant bonus items, hot deal items, and gift certificates.

Dexter Leather Red Heel (H7)

$15.99
$22.99 SAVE 30%

 ADD-ON ITEM SAVE AN EXTRA $1.00
on this item by adding any other item to your purchase!

4 Reviews
16 QuestionsAsk a Question
The 6lb weight is not covered under the manufacturer's warranty.

Dexter Leather Red Heel (H7)

For the "stroker" who wants the least amount of brake this H7, Red Leather heel is exactly what is needed. Recommended for sticky approaches this heel is compatible with all Dexter Mens and Womens SST 5 and higher shoes.

  • CUT TO FIT
  • Little Brake; Most Slide
  • SKU: pd490
  • Product ID: 389
  • Brand: Dexter
  • Category: Bowling Shoes
  Back to Top

Customer Reviews | 16 Customer Questions

Avg Customer Rating
4.8 Stars based on 4 Reviews
Already Own It?
  Review It
Sort 4 Reviews By:
7/17/2021
By A Bell from Virginia
5/5 Stars
Pros:

Easier to slide

Cons:

None really, just had to get use to the slicker feeling.

Best Uses:

If you feel like

Bottom Line:

Yes, I would recommend this to a friend

Exactly what I was looking for.

Couldn’t believe the difference between the original heel, sole combo that came with my shoes. So much easier to get into the finish position that my instructor wants me.

9/9/2014
By BoBo from Springfield Tn
5/5 Stars
Pros:

Comfortable, Stable, Stylish, Versatile

Cons:

None apply

Bottom Line:

Yes, I would recommend this to a friend

I have wore Dexter bowling shoes over 2

Fedex

6/5/2010
By slaterracing from Adel Iowa
5/5 Stars
Pros:

Comfortable

Cons:

NONE

Best Uses:

Sticky alleys

Bottom Line:

Yes, I would recommend this to a friend

Great Product

This heel worked great for me. I had to change from the H5 to the H7 after i broke my angle and now my slide is alot diff. I was sticking very bad with the rubber heel so i switched to this one and it was great. Will get a few more because i know it will wear out over time but it is well worth it for the right slide.

2/21/2020
By Angryvetguy from Mn
4/5 Stars
Bottom Line:

Yes, I would recommend this to a friend

Slide

I am a long slide player, and most heels are to tacky for me. This is just right for stopping me at the line. Only complaint is cutting the heel down is a bit of a pain. Get a good utility knife and mark it out with the factory heel, then cut through.

  Back to Top

Customer Questions & Answers | Reviews

Thanks for answering another customer's question! Once approved it will be posted here.

Please enter a question.

Please enter a nickname.

Question:


Are the heels of the SST and T.H.E 9 the same?

6/20/2016 - By

Have an answer to this question?

Answer:


Hi Deagle50ae, the heels for those shoes are the same, it's only the soles that are different.

6/21/2016 - By Bowling.Com Staff
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Does this heel product ID 389 fit size 13

8/31/2016 - By

Have an answer to this question?

Answer:


Hello Gary! The H7 is designed for Cut to Fit. It will fit for a size 13.

9/2/2016 - By Bowling.Com Staff
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Does sst leather red heel (h7) work on dexter9

9/2/2016 - By

Have an answer to this question?

Answer:


Hello Bob! Yes this heel will work for the Dexter THE 9 shoes.

9/2/2016 - By Bowling.Com Staff
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Does this fit the 9?

11/14/2016 - By

Have an answer to this question?

Answer:


Yes, the heels that Dexter makes will work throughout all of the different interchangeable shoes. However, THE 9 does require a special slide pad on the front of the shoe because of the Toehold clip on the front of the shoes.

11/15/2016 - By Bowling.Com Staff
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


come in pairs r singels

1/23/2017 - By

Have an answer to this question?

Answer:


Hello Harry. These will come in singles and they will be "cut to fit".

1/30/2017 - By Bowling.Com Staff
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


What do you suggest for how to cut this to fit the heel of the shoe? Is there a special tool I need?

8/11/2017 - By

Have an answer to this question?

Answer:


You can either use tough scissors or gardening shears.

8/11/2017 - By Bowling.Com Staff
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


the left heel or right

10/15/2017 - By

Have an answer to this question?

Answer:


This is for both left or right heel. It is for your sliding foot.

10/16/2017 - By Bowling.Com Staff
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Will this fit the Dexter turbo II

9/9/2018 - By

Have an answer to this question?

Answer:


The Dexter Turbo II have fixed slide soles, so they are not removable.

9/11/2018 - By Bowling.Com Staff
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


does this heel need to be trimmed to fit?

5/22/2019 - By

Have an answer to this question?

Answer:


Yes, that is correct!

5/23/2019 - By Bowling.Com Staff
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Will this fit on a hammer shoe?

6/1/2019 - By

Have an answer to this question?

Answer:


You will want to get the KR Strikeforce brand of heel for your hammer shoe.

6/3/2019 - By Bowling.Com Staff
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Can i request for custom made the heel height?

3/4/2020 - By

Have an answer to this question?

Answer:


All of the H7 heels are made of one thickness unfortunately. There is no way to request this to be thicker. The heels can be cut to fit so you can custom cut this down but that is only for the shape to fit your shoe.

3/5/2020 - By Bowling.Com Staff
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Will this work on t.h.e. 9 shoe?

7/21/2020 - By

Have an answer to this question?

Answer:


Yes, the SST heels will work the THE 9 shoes. However, if you get slide soles or traction soles, you have to make sure they are labeled specifically for THE 9 shoes because there are specific soles that fit the THE 9 shoes .

7/22/2020 - By Bowling.Com Staff
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Is this attached by Velcro

10/30/2020 - By

Have an answer to this question?

Answer:


Yes, the heel attaches to the shoe by velcro.

10/30/2020 - By Bowling.Com Staff
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Will this work on the THE shoes?

11/23/2020 - By

Have an answer to this question?

Answer:


Yes, this heel will fit any of the Dexter shoes that have interchangeable heels. If you have the Dexter THE 9 shoes then you would have to order the specific THE 9 slide or traction sole but the heels work on all Dexter shoes with interchangeable heels.

11/24/2020 - By Bowling.Com Staff
1 of 1 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Which sole goes with a h7 heel

9/28/2022 - By

Have an answer to this question?

Answer:


Typically an H7 heel would give you more slide so you may prefer to pair this with a higher number slide like a S10-S12.

10/7/2022 - By Bowling.Com Staff
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!

Question:


Will this heel work on a 3G shoe?

8/9/2024 - By

Have an answer to this question?

Answer:


This heel is only designed to work for Dexter shoes unfortunately.

8/13/2024 - By Bowling.Com Staff
0 of 0 customers found this answer helpful. Did you find this answer helpful? Yes | No Thanks for your feedback!
  Back to Top