A perfect ball for the bowler who is just beginning or as a spare for those extra few pins. Grab this TZone today for your arsenal! This TZone features an Indigo Swirl design that is sure to add to your game.
nice and straight spare ball that goes where you throw it.
I use it to spare my 10 pin.
I use it to spare my 10 pin.
As long as I hit my target, it gets the job done, just a great ball to stop the hook, on drier lanes it can produce a decent amount of hook, replaced my DV8 spare ball
Ball and bag excellent choice fir beginner
goes very straight, so straight i have to keep adjusting! Im 2 handed so i get very high rev rates but its surprising how straight it goes!
I'll work with this ball till I outgrown it.
Very good spare ball. Rolls true and straight. Might get a couple boards of hook late in games out in the dry but it is extremely manageable depending on your rev rate.
The colors/polish look amazing going down the lane.
No More 10 PIN leaves. Almost no more. Still miss a few due to brain farts.
I got this ball for my boyfriend and he loves it!
Theres nothing special about the ball I mean it is only a plastic ball - you can buy many different kinds it basically comes down to the company you like the most
Good spare ball with cool color scheme
The ball has raise my average by 40 pins! A lighter option will be the 9 pin 190 area. A heavier ball with be the 220 strike spilt area. Be careful about drilling, the lighter part is to the right of the holes. This ball is much better for two handed bowlers.
I use this ball primary for picking up spares. It delivers exactly where you want it to hit. I have this ball in berry but in 8 lbs. I wanted a ball a bit heavier so went with same ball. I have no bad comments on this TZone.
Great for ten pins and spare pick ups. Improved my spare game tremendously. Being a high rev player, i needed a ball that goes straight. Love it!
This made those pesky 10 pins easy to make.
My son loves it!!!!!
My wife bought me this ball. Hesitant at first to use but being a right hander the 10 pin is my weakness. Have not missed any pins on right side. Great ball a must have way too easy to control.
This is my best ball
We bought this ball for my little nephew. He loves bowling and even though he is only 6 we thought we would get him started bowling. We had it drilled to fit his grip and he loves having his own ball.
I use this ball for picking up single pin spares or corner leaves. The ball goes exactly where you put it. It goes dead straight and it will hook one board at the most on oil.
I wish that I would have purchased it sooner. If the pros use a spare ball, why can't I? LOL! It has helped my scores a lot. My 200 games have increased all because I am making my spares. Get it!
I'm finally learning how to bowl better and got a decent ball... Now I was having some difficulty picking up spares on the right. Needed a plastic ball that wouldn't hook back when I threw it... Here it is.
I got this for my sons 12th birthday for his 1st ball. He loves having his own ball and I love not wasting all the time looking for a ball that fits him. His game has improved from needing the bumpers to no bumpers and averaging 95 in just a few days. We got the 9 pound one and it is working great for him.
For a child.
A nice light weight, but this ball has chipped and cracked on its way back through the ball return so many times it can’t even be used anymore
this ball is supposed to go straight but it hooks at the end. not a good spare ball.
Don't buy it just yet! I don't bowl too often but after taking it out on the 2nd time it cracked! I'm a petite 110lb person that can't even use a 10lb ball due to wrist problems so there's no way it was me that cracked the ball. I'm so dissapointed about buying this ball.. Dont buy unless you're only going to use it once!!
Hello, It looks like Brunswick does not have a drilling chart for the TZone bowling balls. I can tell you that the standard drill is right over the serial numbers. You may want to talk to your driller about this.
Does this ball glow under regular blacklight conditions?
can it have fingertips
is drilling included in price??
Hello Wes! No. It would be $14.95 to get the ball drilled with us. If you want, though, you can also order the ball undrilled and take it to a local pro shop to get drilled.
whats the return policy if not satisfied with the ball
How much does this ball weigh?
Hello. You can view the ball weights that we have available by clicking on "Select Weight". There you can view all of the weights that we have in stock.
How can i figure out the hole size??? I have fat fingers and want to make sure they arent too tight
Do you drill the holes? How do you get the size?
Hi James. We do offer that option. If you select 'Drilling w/ FREE protection' you have the option to select the size you will need. To view the size chart, please click on the word 'detail' under the $14.95 drilling price.
Everyone saying a good spare ball, but ok to use all the time, if a straight thrower (no hook)? Thanks!
i buy the ball here on line were do i get the holes drilled in the ball do i go to a boweling alley
We do offer drilling options through us for $14.95 if you were interested in us drilling the ball here. There is a size chart in the details button beside the drilling option. Or you can have it custom drilled locally at a local proshop. Your bowling center would either have a proshop in-house or should have a number for you to contact a proshop in your area.
Is it plastic
What should i do to get the right drilling size?
Does the ball come prepared installed with holes?
Hello! The bowling balls do not come pre-drilled. You do have the option on this ball to have it drilled before it is sent to you, if you know your hand measurements. You can also have your ball drilled at your local pro shop.
Can you get a 6 lb. in this ball
Does this ball have the ability to hook?
Do the balls come predrilled with finger holes?
If I’m getting this ball as a spare ball should it be lighter weight than my normal ball?
Can I get ball drilled to specific specifications based off my PAP style
Is it drilled
It does not come drilled unless you want bowling.com to drill it for you. If you would like for a driller to drill it for you, you would need to take it to your local pro shop or bowling alley for them to drill it for you.
does it come with holes
Can this ball be used by a seasoned bowler?GIN GIN
Does it come undrilled? Why drilling insurance?
It will come undrilled. The drilling insurance is for when you get it drilled and if the ball splits, chips or cracks during the drilling, we will cover the ball and send you a new one.
Can I hook this ball? I bowl with the Jason Belmonte style. Also, can I use a ball without the drill holes???
How do I know what size holes to drill for my 4yr old
To see the size chart for the drilling you may click the "?" out beside the $14.95 drilling option. This should open a size chart to check our drilling options. You may also not want to do drilling yet if he is that young. Some younger bowlers may not need the holes until they get old enough to throw with one hand.
hai! in review said Hook Potential: 25 (scale 10-175 high) .. so this ball also can hook? or just straight?
This ball is intended to just go straight. If the lane conditions were very dry and you spin this ball then it would probably hook a little bit but that is only from the spin you put on the ball so the hook potential is listed as being very very low just for that reason.
Total price with holes
Can I see the houls.
The ball does not start with finger holes. We offer drilling and you may check the sizing of our drilling options by clicking the "?" beside the $14.95 drilling option. Some people wait and get the ball drilled locally after the receive the ball so the finger holes can be customized to fit your hand perfectly.
What is a regular kids house ball drilled at
We do offer a basic drilling for this ball in certain weights. To see the sizing you can click the "?" out beside the $14.95 drilling option and it should show you some measurements for the finger hole sizes and the span between the thumb and finger holes.
Is this a reactive ball?
Where is this ball made
is this a strait plastic boll
how do you know where to drill in order for it to fit me?
This ball offers a basic $14.95 drilling option and the sizes are predetermined. You may check the size chart for these sizes by click the "?" beside the drilling option if it is offered for the weight you select.
Can I get just the two finger holes drilled and no thumb hole?
Yes, you may request this on the final review page in the customer comments box. This page is after you have entered your address and card information in the checkout.
What is the finish on the Tzone B bowling ball
What grit is the T zone finished with?
Is this a reactive ball?
Where do these balls get drilled at plus where do you get your hand fitted properly for this?
We offer drilling for some bowling balls but if we do not have drilling offered or if you would prefer to have the drilling custom the you may get the ball drilled at a local proshop after you receive the ball.
What about the hole size for fingers?
We offer drilling for an extra fee and you may select which size you would like the holes. To see the size chart click the "?" beside the drilling option.
I was wondering if the holes could be drilled out for a left handed person if i bought a ball from you
Yes, when you get to the final page of the checkout there is a customer comments box and you will need to mention that this is for a left handed bowler so the driller can set this up for left handed drilling
How can you order the ball pre drilled?
If i opted for the drilling protection and have it drilled outside, will it still cover the protection just in case and accident occur?
The drilling protection is designed to help you if the ball chips or cracks while you are having this drilled at a local proshop. We would not drill it if you select the drilling protection. To see more details on this you may click the "?" beside this option for a pop up of the benefits.
I am looking for a straight ball. Is this a straight ball
How do I know what weight I need
The weight you need will depend on your personal preference. You may want to check the weight that you feel most comfortable using when you bowl with the house balls.
With drilling, are grips included in the finger holes?
Does the ball have large finger holes
This ball will not have holes to start with. We do have drilling offered at times for this ball and if drilling is offered you may select from the sizes we offer to get the best size that fits you. When drilling is available you can click the "?" beside it to get a size chart.
Does the ball already come drilled
The bowling balls do not start out with holes. We sometimes have a drilling option for an extra fee but you would have to select this for us to do the drilling. If you do not select this or this was not offered then you would have to drill the ball locally.
What makes this ball a good spare ball
Do the balls com pre drilled or take to shop